|
NOTE: It is important that every amplifier be carefully checked before a burned out transformer is replaced. Too often some other defect, such as bad tube, capacitor, or a partial circuit short has caused the original transformer to fail and the new replacement is also ruined before the real cause is found and remedied.
Burned out transformers cannot be returned for credit ! ! ! |
PACIFIC Transformers
Made The Way Audio Gods Intended:
PAPER - COPPER - STEEL - VARNISH
All of the Pacific transformers are the direct factory replacements for the amplifiers listed. All of them are built to the original factory specifications and have identical mounting holes to the originals. NO CUTTING or DRILLING IS REQUIRED! |
We Also Stock MOJO-TONETM, Schumacher/New Sensor Corp.® and Hammond Transformers
 Pacific Transformers |
| PART NUMBER | AMPS USED IN | TUBE TYPE | DETAILS |
Suggested List
US$ PRICE |
|---|
| Fender part# 125A35A and 022905 | Fender Champ | 1 x 6V6GT | Output Transformer 4-ohm, mounting centers: 2-inches | US$29.95 |
|  Fender Princeton | 2 x 6V6GT | Power Transformer, Dual primary, mounting centers: 2.50 x 2.00-inches | US$99.50 |
| Fender part# 125P26A, 022723, and 036483 | Fender Deluxe Reverb, Fits some Deluxes, Princetons, Vibroluxs, Tremoluxs, check hole dimensions. | 2 x 6V6GT
or 6L6GC | Power supply Transformer with 5v and 6.3v filament windings and 50v Bias tap.
Hole patttern:
2 13/16in. x 2 1/4in.
Shipping wt. 6 lbs. | US$99.50 |
| Fender Princeton, Old Style Deluxe | 2 x 6V6GT | Speaker output Transformer 8-ohm, mounting centers: 2 13/16-inches | US$43.50 |
| Fender part# 125A1A and 022640 | Fender Deluxe Reverb, Deluxe, early Tremolux and Ampeg Jet | 2 x 6V6GT | Speaker output Transformer 8-ohm, mounting centers: 3 1/8-inches
Primary resistance: 6,500-ohms; secondary: 8-ohms; Frequency response: 20Hz to 20kHz | US$46.50 |
| Fender Vibrolux Reverb, Tremolux, and some Concerts | 2 x 6L6GC | Power supply Transformer with 5v and 6.3v filament windings and 50v Bias tap. Hole patttern: 2.1563 x 2.50-in. | US$115.00 |
| Fender part# 125P5D and 022798 | Fender Super Reverb, Bandmaster Bassman | 2 x 6L6GC | Power supply Transformer with 5v and 6.3v filament windings and 50v Bias tap.
Hole patttern:
2 13/16-inches x 3 7/16-inches
Shipping wt. 8 lbs. | US$150.00 |
| Fender part# 125A9A, 022855, and 018343 | Fender Super Reverb, Bassman general replacment | 2 x 6L6GC | Speaker output Transformer 2, 4, and 8ohm output.
Primary resistance: 4,230-ohms; secondary: 2, 4, and 8-ohms; Frequency response: 20Hz to 20kHz
Shipping wt. 7 lbs. | US$129.75 |
| Fender part# 125A6A, 125A7A, 022848, and 036968 | Fender Pro Reverb, Bandmaster, Tremolux | 2 x 6L6GC | Speaker output Transformer 4-ohm, Hole mounts 3.50-inches center-center.
Primary resistance: 20,000-ohms; secondary: 4-ohms; Frequency response: 20Hz to 20kHz. Shipping wt. 4 lbs. | US$68.00 |
| Fender part# 125P34A and 022756 | Fender Twin Reverb, Showman, Dual Showman, Quad Reverb, Bassman 100 | 4 x 6L6GC | Power supply Transformer, mounting centers: 3 x 3 3/4-inches | US$136.00 |
| Fender part# 125A29A, 125A30A, 022897 and 022889 | Fender Twin Reverb, Showman, and Dual Showman | 4 x 6L6GC | Speaker output Transformer 4 ohms
Primary resistance: 1,900-ohms; secondary: 4-ohms; Frequency response: 20Hz to 20kHz | US$136.50 |
| Fender part# 125C3A and 022707 | Deluxe Reverb, Princeton, etc. | N/A | Power supply filter Choke, Hole mounts 1.75-inches center-center
WT. 2 lbs.
Inductance: 4.0 Henries; DC resistance: 150-ohms | US$22.95 |
| Fender part# 125C1A and 036486 | Super Reverb, Twin Reverb, etc. | N/A | Power supply filter Choke, Hole mounts 2.8125-inches (2 13/16 in). center-center
Inductance: 3.0 Henries; DC resistance: 90-ohms | US$26.50 |
| Marshall Choke, 50 and 100-watt | | Power supply filter Choke, mounting centers: 2 13/16-inches. Inductance: 3-henries; DC resistance: 100-ohms | US$45.00 |
| Fender part# 125A20A and 022921 | Fender Deluxe Reverb, Pro Reverb, Super Reverb, Twin Reverb | 12AT7 | Reverb Driver Transformer, mounting centers: 1 3/4-inches.
Primary resistance: 22,275-ohms; secondary: 8-ohms; Frequency response: 20Hz to 20kHz | US$25.00 |
| 63' Reissue Fender Reverb | 6V6GT | Reverb Driver Transformer. Genuine Fender part. | US$35.50 |
| Marshall 100-watt
Direct replacement for 800 series. Nice upgrade for 900 series, more headroom and bass. You will have to drill holes for 900 series. | 4 x EL34 or 4 x 6550A | Speaker output Transformer 4, 8, and 16ohm. Mounting centers: 2 3/4 x 3 1/8-inches
Primary resistance: 1,730-ohms; secondary: 4, 8 and 16-ohms; Frequency response: 20Hz to 20kHz | US$173.00 |
| Marshall power transformer, Mounts standing up outside the chassis | 2 x EL34 | 50-watt Power supply transformer, mounts outside the chassis, hole to hole mounting centers: 3.50 x 3.00-inches. | US$221.95 |
| Marshall 50-watt/Musicman 65 output transformer | 2 x EL34 | Output transformer, 50 watt, 4, 8, and 16-ohm taps, mounting centers: 2 3/8 x 2.50-inches. | US$109.00 |
 | How To Order, Purchase, and Shipping Information |
| TOP of this PAGE |
| BACK
To MAIN PARTS MENU |
| Schumacher/New Sensor Corp. Transformers for Fender Amps |
| Made to original factory specifications (paper, copper, steel and varnish). Direct replacements for Vintage and current models. High quality construction. Manufactured in the USA by Schumacher, the original manufacturer for Fender transformers. |
| Output Transformers for Fender Amps |
|---|
| PART NUMBER | MODELS USED IN | Suggested List
US$ PRICE |
|---|
| Universal Output can be used on any 50 watt amp.
50 watts - 2, 4, & 8 ohms | US$98.00 |
| Output transformer for Bassman heads, Pro Reverb upgrade.
50 watts - 4 ohms | US$98.00 |
| Output transformer for Super Reverb, Tweed Bassman, Concert.
50 watts - 2 ohms | US$88.00 |
| Output transformer for Tremolux, Pro Reverb, Vibrolux, BandMaster, Vibroverb.
35 watts - 4 ohms | US$60.00 |
| Output transformer for Champ, Vibro Champ, Bronco. 2.5-inch hole to hole mount
8 watts - 4 ohms | US$44.50 |
| Reverb Driver transformer for all amps with reverb.
3.5 watts - 4 ohms | US$22.50 |
| Output transformer for Princeton Reverb.
12 watts - 8 ohms | US$44.50 |
| Output transformer for Twin Reverb, Dual Showman, Bassman 100.
100 watts - 4 ohms | US$136.50 |
| Output transformer for Deluxe, Deluxe Reverb.
25 watts - 8 ohms | US$41.00 |
| How To Order, Purchase, and Shipping Information |
| TOP of this PAGE |
| BACK
To MAIN PARTS MENU |
| Power Supply Transformers for Fender Amps |
|---|
| Power Transformer for Bassman Heads, Concert, Pro.
50 watts | US$120.00 |
| Power transformer for Champ, Vibro Champ, Bronco, Princeton, Princeton Reverb, Harvard.
6 - 12 watts | US$73.50 |
| Power transformer for Super Reverb, Pro Reverb, BandMaster, Tweed, Bassman. (With rectifier tap.)
50 watts | US$122.00 |
| Power transformer for Twin Reverb, Dual Showman, Bassman 100.
100 watts | US$122.00 |
| Power transformer for Deluxe, Deluxe Reverb.
25 watts | US$87.00 |
| How To Order, Purchase, and Shipping Information |
| TOP of this PAGE |
| BACK
To MAIN PARTS MENU |
| New Sensor Filter Chokes for Fender Amps |
|---|
| Power Supply Filter Choke for Twin, Super, Dual Showman. | US$25.90 |
| Power Supply Filter Choke for Deluxe, Vibrolux. | US$17.90 |
| How To Order, Purchase, and Shipping Information |
| TOP of this PAGE |
| BACK
To MAIN PARTS MENU |
New Sensor Corp. Transformers for Marshall Amps
These power and output transformers are built to vintage specifications with correct interleave ratios and lots of iron. Perfect upgrade for later and re-issue Marshalls. Great replacements for many other Vintage British amps. High quality - Classic sound. |
New Sensor Transformers for Marshall Amps
Perfect upgrade for later and re-issue Marshall amps,
great for JCM800. NOT for JCM900 |
|---|
| PART NUMBER | MODELS USED IN | Suggested List
US$ PRICE |
|---|
| Output transformer 50 watts | US$119.00 |
| MOP-100 | Output transformer 100 watts | US$128.00 |
| Power transformer 50 watts with 120V/220V/240V Primary Taps, Mounts laying down through the chassis, hole to hole mounting centers: 3.125 x 2.50-inches | US$120.00 |
| Power transformer 100 watts with 120V/220V/240V Primary Taps | US$148.00 |
| How To Order, Purchase, and Shipping Information |
| TOP of this PAGE |
| BACK
To MAIN PARTS MENU |
| VOX Transformers - Special Order |
|---|
| Vintage old style, AC-30 Output transformer, 4K primary impedance with 8/16 secondary taps | US$165.50 |
| Reissue AC-30 Output transformer, 4K primary impedance with 8/16 secondary taps | US$115.50 |
| Vintage old style, AC-30 Power transformer with 120V/220V/240V primary taps. Secondary high voltage: 280-0-280vac | US$195.00 |
| Reissuse AC-30 Power transformer with 120V/220V/240V primary taps. Secondary high voltage: 280-0-280vac | US$135.00 |
| AC-30 Filter Choke, Impedance: 10 to 20 henries @ 100ma
| US$60.00 |
| How To Order, Purchase, and Shipping Information |
| TOP of this PAGE |
| BACK
To MAIN PARTS MENU |
HAMMOND 1600 series Push-Pull Transformers
We can special order any Hammond product. |
| Hammond Output Transformer
20 watt, primary imp. 6.6k center tap w/
40% screen taps for ultra-linear operation. Secondary: 4/8/16-ohms | US$100.00 |
| How To Order, Purchase, and Shipping Information |
| TOP of this PAGE |
| BACK
To MAIN PARTS MENU |
Zack Engineering's Vibroworld.com
Web Quarters For Guitar and Tube Amp Parts
16246 SE Salmon Street
Portland Oregon USA 97233-4049
VOX: 503-255-7122 FAX: 503-255-5951 |
|
|
|
|
