Magnatone Logo
Maestro 212-8B
More information about the unique amplifiers made by Magnatone and Valco
Maestro 212-8B

Scott sent these photos of his Maestro 212-8B. It has 2 instrument inputs and a microphone input. There is a control for instrument volume and micrphone volume. It also has bass and treble controls. A power switch, standby switch, red and green pilot lamps finish off the preamp control panel which is located in the top of an open-back cabinet. I don't know what tubes belong in the preamp section. Scott needs a schematic. Please Email me if you have a Maestro 212-8B or can help with tube types and/or locations.view of control panel on Maestro 212-8B

The power amp section is located in the bottom of the cabinet. Scott told me there are two 5Y3GT rectifiers, a 12AU7 and two 5881's. There is another empty tube socket but we don't know what tube belongs in it. Again, please Email me if you have a Maestro 212-8B or can help with tube types and/or locations. Judging by the model number this amp should have two 12-inch speakers even though Scott says one was removed and a 10-inch RCA (EIA code: 274-3280) was put in its place.

Approx. Watts
Serial Number: Not available
Owner: Scott Gossage
Photo: ©1998 Scott Gossage. Used by permission.

For more Information contact:
Go To Magnatone-Valco discussion groupMagnatone-Valco discussion group
Go To Parts@VibroworldVibroworld has Magnatone Parts
| BACK to the ARCHIVE MENU|

| FRONT PAGE || MAGNATONE ARCHIVE || SCHEMATIC SERVICE |
| VIBRO-PRODUCTS || VIBRATO or TREMOLO || VIBROWORLD.COM |

Zack Engineering's
Unofficial Magnatone SiteTM
Portland Oregon | 97233-4049
VOICE: 503-255-7122
FAX: 503-255-5951
Magna V

Updated January 30th 2000 at 6:42 pm PST
ZACK ENGINEERING © 1997